Welcome to ZJ·BETTER
English 中文
FAQ
Product
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
  • Integrated stainless steel underground prefabricated pumping station
Integrated stainless steel underground prefabricated pumping station
Integrated stainless steel underground prefabricated pumping station
Integrated stainless steel underground prefabricated pumping station
Integrated stainless steel underground prefabricated pumping station
Integrated stainless steel underground prefabricated pumping station

Integrated stainless steel underground prefabricated pumping station

The world's best integrated stainless steel prefabricated buried pumping station designed to solve urban rainwater harvesting and drainage and solidification
Print this page
Share:
Product Description
The following should be checked before commissioning:
1. Whether the installation and setting are correct, and should check whether the design requirements are met.
2. The pipeline that may generate vacuum, the vacuum failure valve should have sufficient filtration area. The action should be accurate and reliable.
3. The valves on the inlet and outlet pipes should be fully opened, and other devices should be in normal working condition. The power supply capacity, voltage level, and electrical protection device shall meet the requirements of the installed electromechanical equipment. The pumping station shall be commissioned according to the international relevant construction acceptance specifications, and commissioned in stages.
The pump should be commissioned to meet the following requirements:
1. Whether the installation and setting of the large-scale integrated sewage lift pump station is correct, and should check whether it meets the design requirements.
2. The rotor and various moving parts should be in normal operation with no abnormal sound and friction.
3. The auxiliary system is operating normally, and the pipeline connection should be firm and free of leakage.
4. The safety protection and electronic control device of the pump and all parts of the instrument should be sensitive, correct and reliable. When the pumping station adopts the rapid gate cut-off and the accident gate on the downstream side, the linkage time of the automatic control should be adjusted to meet the design requirements of the unit protection. The on-site operation and remote control should be reliable.
Application:
It is suitable for collecting and discharging sewage and wastewater from residential quarters, restaurants, schools, factories, barracks and other public places. It is mainly installed outdoors and underground, and can also be used indoors.
Integrated prefabricated pumping station designed to solve urban rainwater harvesting and drainage and urban sewage upgrading
There is a service platform inside the pumping station for maintenance of valves and pumps, and maintenance of platforms of different forms, positions and heights as required.
1. The liquid level sensor uses the pressure sensor and the special monitoring relay to realize the automatic control of the liquid level of the pump station.
2. The crushing grid of the pumping station should be placed at the inlet of the FRP cylinder of the pumping station, the submerged crushing grille is safe and reliable; the supporting rails are convenient for maintenance and repair.
Model meaning:
PPS 08 × 22 / 0.39 - 2 / SS
① ② ③ ④ ⑤ ⑥

1. Integrated prefabricated pumping station
2. Wellbore diameter
08=Φ800mm
10=Φ1000mm
12=Φ1200mm
20=Φ2000mm
38=Φ3800mm

3. Shaft height (length, depth): the height of the entire cylinder indicated (without accessories)
22=2200mm
25=2500mm
60=6000mm
130=13000mm
4.Pump station effective volume(m3)
5. The number of pump stations equipped with water pumps: 2 (can be equipped with 2-4 sets)
6. Material of the conveying pipe
Stainless steel 304SS, Carbon steel or Plastic pipe
Environment and working conditions:
·The ambient temperature should be -40 °C ~ 40 °C.
·The relative humidity is preferably 25% to 85%, and the anhydrous beads are condensed.
·The water medium delivered by the pumping station should meet the following requirements:
The temperature should be -5 °C ~ 70 °C;
PH value should be 4~10; (over-range use should be made at the time of ordering)
The maximum diameter of the particles in the conveying medium should be smaller than the diameter of the selected water pump.
·Power supply:
380V (±10%), 3-phase five-wire system, 50Hz (±5%);
220V (±10%), single phase, 50Hz (±5%).
·Vibration: <0.5g, vibration frequency 10Hz-50Hz maximum vibration acceleration should not exceed 5m / s2.
·The equipment operation location is generally applied to non-conductive or explosive dust (for occasions where the environment is required, please make an order when ordering, you can configure explosion-proof submersible pump (ExdI, ExdIIAT4, ExdIIBT4, ExdIICT4) or explosion-proof control cabinet, no corrosive metal or damage insulation gas or steam.
Performance parameter list:
 
Model Staion Flow Pump flow Pump 5 min flow Start/close times effective volume Diameter liquid height height weight
m3/day M3/h M3/5min Times/h M3 m m m kg
PPS08X22/0.39-2 259 11 0.9 7 0.4 0.8 0.15 2.2 231
PPS08X22/0.54-2 360 15 1.3 7 0.5 0.8 0.21 2.2 231
PPS08X23/0.77-2 518 22 1.8 7 0.8 0.8 0.31 2.3 240
PPS08X24/0.90-2 605 29 2.1 7 0.9 0.8 0.36 2.4 248
PPS08X24/1.03-2 691 29 2.4 7 1.0 0.8 0.41 2.5 248
PPS08X25/1.29-2 864 36 3 7 1.3 0.8 0.51 2.5 254
PPS08X28/1.93-2 1296 54 4.5 7 1.9 0.8 0.77 2.8 278
PPS08X30/2.57-2 1728 72 6 7 2.6 0.8 1.02 3.0 295
PPS10X30/3.21-2 2160 90 7.5 7 3.2 1 1.02 3.0 386
PPS10X31/3.57-2 2402 100 8.3 7 3.6 1 1.14 3.1 396
PPS14X30/4.50-2 3024 126 10.5 7 4.5 1.4 1.02 3.0 531
PPS14X32/5.14-2 3456 144 12 7 5.1 1.4 1.17 3.2 556
PPS18X30/5.79-2 3888 162 13.5 7 5.8 1.8 1.02 3.0 712
PPS18X31/6.43-2 4320 180 15 7 6.4 1.8 1.14 3.1 729
PPS20X31/7.07-2 4752 198 16.5 7 7.1 2 1.13 3.1 1164
PPS30X40/19.29-2 12960 540 45 7 19.3 3 2.05 4.0 2385
PPS40X122/128.57-2 86400 3600 300 7 128.6 4 10.23 12.2 9002
For more specifications, please contact us.
Inquiry
 
Please feel free to submit your inquiry information to us! our sales manager will contact with
you as soon as possible
* Name:
Conutry:
* Email:
Tel:
Type:
Flow:
Head:
Power:
Medium:
* Inquiry: