Welcome to ZJ·BETTER
English 中文
FAQ
Product
  •  integrated lift pumping station
  •  integrated lift pumping station
  •  integrated lift pumping station
  •  integrated lift pumping station
  •  integrated lift pumping station
  •  integrated lift pumping station
  •  integrated lift pumping station
  •  integrated lift pumping station
  •  integrated lift pumping station
  •  integrated lift pumping station
 integrated lift pumping station
 integrated lift pumping station
 integrated lift pumping station
 integrated lift pumping station
 integrated lift pumping station

integrated lift pumping station

The world's most intelligent control control system automatic cleaning base sewage capacity high floor area small construction cycle is short applied to low-lying sewage drainage sewage lifting pump station
Print this page
Share:
Product Description
Advantage:
1. The floor space is small, alleviating the problem of land use in urban land, and dealing with a large amount of sewage and high efficiency.
2. The construction period is short. While ensuring the quality of the products, from the survey and development plan, to the design and production of sewage pumping stations, to the transport installation test, the whole process is about 20 days, compared with the traditional concrete pumping station, shortening at least half of the time.
3. Intelligent control of the operating system. It can perform operation operations such as pump station operation and log viewing to achieve full monitoring of the pump station. The pump station can also be operated remotely via a mobile device.
4. Made of GRP anti-corrosion material, light weight and durable, service life of more than 50 years.
5. Automatic cleaning of the base. After CFD fluid dynamics finite element analysis, the base structure is optimized and improved, and sludge deposition in sewage treatment is prevented, and no odor remains.
6. High sewage discharge capacity. The spiral design of the high-quality submersible centrifugal pump, combined with the crushing grid, greatly improves the decontamination ability of the pumping station. 

Effect:

 1. Drainage and drainage for areas with low ground potential and easy formation of guilt, reducing rainwater damage to the land environment, causing economic losses and casualties.
2. Using potential energy and pressure energy, the rainwater flowing into the pumping station will be raised to the water level, and then pressurized to ensure timely discharge of rainwater, without causing sludge blockage to the pipeline.
3. Submersible sewage pump with high efficiency of sewage discharge. GRP anti-corrosion material production, spiral high-efficiency mixing, remove silt, particles and other magazines, to ensure that the pipeline is smooth, no odor.

Application range:

 It is widely used in living communities, villa groups, factory collective living areas, etc., as well as drainage and sewage treatment of hospital health systems. Domestic sewage itself has good viability, and the pollution level of pollutants is low, degradable and easy to handle. The sewage integrated lift pumping station can contribute to the formation of biological bacteria and promote the reproduction of microorganisms, and the sewage treated by the biological bacteria can effectively meet the discharge standard.
Model meaning:

PPS 08 × 22 / 0.39 - 2 / SS
① ② ③ ④ ⑤ ⑥

1. Integrated prefabricated pumping station
2. Wellbore diameter
08=Φ800mm
10=Φ1000mm
12=Φ1200mm
20=Φ2000mm
38=Φ3800mm

3. Shaft height (length, depth): the height of the entire cylinder indicated (without accessories)
22=2200mm
25=2500mm
60=6000mm
130=13000mm
4.Pump station effective volume(m3)
5. The number of pump stations equipped with water pumps: 2 (can be equipped with 2-4 sets)
6. Material of the conveying pipe
Stainless steel 304SS, Carbon steel or Plastic pipe
Environment and working conditions:
·The ambient temperature should be -40 °C ~ 40 °C.
·The relative humidity is preferably 25% to 85%, and the anhydrous beads are condensed.
·The water medium delivered by the pumping station should meet the following requirements:
The temperature should be -5 °C ~ 70 °C;
PH value should be 4~10; (over-range use should be made at the time of ordering)
The maximum diameter of the particles in the conveying medium should be smaller than the diameter of the selected water pump.
·Power supply:
380V (±10%), 3-phase five-wire system, 50Hz (±5%);
220V (±10%), single phase, 50Hz (±5%).
·Vibration: <0.5g, vibration frequency 10Hz-50Hz maximum vibration acceleration should not exceed 5m / s2.
·The equipment operation location is generally applied to non-conductive or explosive dust (for occasions where the environment is required, please make an order when ordering, you can configure explosion-proof submersible pump (ExdI, ExdIIAT4, ExdIIBT4, ExdIICT4) or explosion-proof control cabinet, no corrosive metal or damage insulation gas or steam.
Structure:
 

Basic parameters:

·Flow range: 5 ~ 3600m3 / h;
·Motor power: 0.37 ~ 160kW;
·Pumps: 1 to 4 units;
·Ambient temperature: -40 °C ~ 40 °C;
·Medium temperature: -5 °C to 70 °C.
·Allowable media: rainwater, sewage, wastewater, etc., and other medium that are free of abrasive or long-fiber impurities and that are not chemically or mechanically corroded by the pump.

Performance parameter list:

 
Model Staion Flow Pump flow Pump 5 min flow Start/close times effective volume Diameter liquid height height weight
m3/day M3/h M3/5min Times/h M3 m m m kg
PPS08X22/0.39-2 259 11 0.9 7 0.4 0.8 0.15 2.2 231
PPS08X22/0.54-2 360 15 1.3 7 0.5 0.8 0.21 2.2 231
PPS08X23/0.77-2 518 22 1.8 7 0.8 0.8 0.31 2.3 240
PPS08X24/0.90-2 605 29 2.1 7 0.9 0.8 0.36 2.4 248
PPS08X24/1.03-2 691 29 2.4 7 1.0 0.8 0.41 2.5 248
PPS08X25/1.29-2 864 36 3 7 1.3 0.8 0.51 2.5 254
PPS08X28/1.93-2 1296 54 4.5 7 1.9 0.8 0.77 2.8 278
PPS08X30/2.57-2 1728 72 6 7 2.6 0.8 1.02 3.0 295
PPS10X30/3.21-2 2160 90 7.5 7 3.2 1 1.02 3.0 386
PPS10X31/3.57-2 2402 100 8.3 7 3.6 1 1.14 3.1 396
PPS14X30/4.50-2 3024 126 10.5 7 4.5 1.4 1.02 3.0 531
PPS14X32/5.14-2 3456 144 12 7 5.1 1.4 1.17 3.2 556
PPS18X30/5.79-2 3888 162 13.5 7 5.8 1.8 1.02 3.0 712
PPS18X31/6.43-2 4320 180 15 7 6.4 1.8 1.14 3.1 729
PPS20X31/7.07-2 4752 198 16.5 7 7.1 2 1.13 3.1 1164
PPS30X40/19.29-2 12960 540 45 7 19.3 3 2.05 4.0 2385
PPS40X122/128.57-2 86400 3600 300 7 128.6 4 10.23 12.2 9002
For more specifications, please contact us.



Application cases:

Inquiry
 
Please feel free to submit your inquiry information to us! our sales manager will contact with
you as soon as possible
* Name:
Conutry:
* Email:
Tel:
Type:
Flow:
Head:
Power:
Medium:
* Inquiry: