Welcome to ZJ·BETTER
English 中文
Position : Home > News

Integrated Prefabricated Pumping Station Environment and working conditions

The ambient temperature should be -40 °C ~ 40 °C.
The relative humidity is preferably 25% to 85%, and the anhydrous beads are condensed.
The water medium delivered by the pumping station should meet the following requirements:
The temperature should be -5 °C ~ 70 °C.
PH value should be 4~10; (over-range use should be made at the time of ordering). The maximum diameter of the particles in the conveying medium should be smaller than the diameter of the selected water pump.

Power supply:
380V (±10%), 3-phase five-wire system, 50Hz (±5%);
220V (±10%), single phase, 50Hz (±5%).

Vibration: <0.5g, vibration frequency 10Hz-50Hz maximum vibration acceleration should not exceed 5m / s2.

The integrated prefabricated pumping station operation location is generally applied to non-conductive or explosive dust (for occasions where the environment is required, please make an order when ordering, you can configure explosion-proof submersible pump (ExdI, ExdIIAT4, ExdIIBT4, ExdIICT4) or explosion-proof control cabinet, no corrosive metal or damage insulation gas or steam.s